EDDM Political Mail

EDDM for
Political Campaigns

Saturate every household in your district with USPS Every Door Direct Mail. No voter list needed. The lowest postage rate available. Maximum reach, minimum cost.

$0.214
Per-piece postage
No list
Required
100%
Household saturation
5–7 days
Turnaround
What is EDDM?

What EDDM Is and Why It Works for Political

Every Door Direct Mail (EDDM) is a USPS program that allows campaigns to mail to every delivery point on selected carrier routes — without purchasing or maintaining a voter file. The postage rate is just $0.214 per piece, making it the lowest available postage category for political mail. For context, targeted mail postage typically runs $0.26–$0.30 per piece depending on presort level, plus the cost of the voter file pull itself.

The absence of a list rental cost is the defining financial advantage. A 10,000-piece targeted mailing typically requires a voter file pull ($0.04–$0.12 per name), NCOA processing, and higher postage. The same 10,000 pieces via EDDM eliminates all three of those line items and delivers to 100% of households on the selected routes — not just registered voters.

For the right race — especially GOTV in high-turnout precincts, name ID building for open-seat candidates, and hyper-local municipal contests — EDDM can deliver saturation reach at a fraction of the cost of targeted mail. The trade-off is that you're mailing to every household, not just voters, which reduces your message efficiency. The key is knowing when that trade-off works in your favor.

No voter file purchase, append, or NCOA processing required
Minimum $0.214/piece postage — vs. $0.26–0.30 for targeted lists
Delivered to every residential delivery point on selected routes
Oversized format (6.5×9 or larger) cuts through mailbox clutter
Available in all 48 contiguous states and many territories

EDDM vs. Targeted Mail — Side by Side

Voter list required?
No
Yes
Postage rate
$0.214/piece
$0.26–0.30/piece
List cost
$0
$0.04–0.12/name
Coverage
100% of households
Selected voters only
Best for
GOTV, name ID, saturation
Persuasion, targeted universe
Minimum quantity
200 per route
1,000 total
EDDM
Targeted
When to Use EDDM

When EDDM Beats Targeted Mail

EDDM isn't the right tool for every campaign. A persuasion program aimed at soft Republicans in a contested state house district should use a targeted voter file, not a saturation route map. But there are specific scenarios where EDDM not only works — it outperforms targeted mail on a cost-per-household basis.

The clearest use case is GOTV in high-registration, high-turnout precincts where your voter universe represents 70%+ of the households on the route. When registration density is that high, the cost difference between EDDM and targeted mail evaporates — and EDDM wins on speed and simplicity.

GOTV in high-turnout precincts

When you need to mobilize every registered voter in a precinct, EDDM saturates entire carrier routes faster and cheaper than a targeted pull.

Name ID in open-seat races

New candidates with no incumbent advantage benefit most from 100% household reach. EDDM ensures your name lands in every mailbox before the election.

Hyper-local district races

City council, school board, and water district races often cover just a few carrier routes. EDDM covers the entire district for $200–$800 in postage.

Low-budget campaigns

When you can't afford a voter file purchase plus postage plus design, EDDM removes the list cost entirely — letting you spend more on creative and printing.

Last-minute GOTV drops

EDDM pieces bypass some of the USPS entry delays that targeted presort mail faces. In the final 72 hours, EDDM can be the faster delivery option.

Non-partisan issue campaigns

Ballot measures, school levies, and referendums benefit from broad household reach because the target universe isn't defined by voter file segments.

Route Selection

Carrier Route Selection and the EDDM Map Tool

The USPS EDDM mapping tool (available at usps.com/eddm) lets you browse every carrier route in the country by ZIP code, see the number of residential and business delivery points on each route, and estimate your total postage before you commit to a single print run. It's a powerful planning tool — but it doesn't tell you which routes have the highest concentration of actual voters.

That's where we add value. We help campaigns layer precinct-level voter turnout data on top of carrier route maps — scoring each route by the percentage of households that contain registered voters, and by the percentage of those voters who have participated in recent elections. A route with 400 delivery points and 65% voter registration density is worth more than a route with 600 delivery points and 30% registration density, even though USPS charges the same per-piece rate for both.

01
Draw your district boundary
We map your district or target area and identify all carrier routes that fall within or substantially overlap it.
02
Score routes by turnout
We layer in precinct-level voter turnout data to rank routes by the concentration of frequent voters.
03
Select and budget routes
You choose which routes to include based on your budget. 200-piece minimum per route applies.
04
We handle USPS entry
We bundle, sort, and submit your EDDM mailing directly to the originating post office for each route.

Sample EDDM Budget Calculator

500 households × 1 route
USPS postage: $107
$280–$340
all-in estimate
2,500 households × 5 routes
USPS postage: $535
$1,100–$1,400
all-in estimate
10,000 households × 20 routes
USPS postage: $2,140
$3,800–$4,800
all-in estimate
25,000 households × 50 routes
USPS postage: $5,350
$8,500–$10,500
all-in estimate

All-in includes design, print, postage, and USPS entry. Estimates based on 6.5×9 EDDM format.

Compliance

USPS EDDM Political Mail Compliance Rules

EDDM Retail has specific physical requirements and entry procedures that differ from standard presort mail. Getting these wrong doesn't just delay your mail — in some cases it means your pieces are returned to sender before ever leaving the post office. We've seen it happen to campaigns that tried to run their own EDDM without understanding the rules.

Every EDDM job we produce is pre-flighted for compliance before it goes to press — size, weight, indicia placement, disclaimer language, bundle counts, and entry documentation. You approve the proof; we handle everything that touches USPS.

Size requirements

EDDM Retail requires pieces to be at least 6.125" × 11.5" and no more than 15" × 12". We design to these specs on every job.

Weight limits

Maximum 3.3 oz per piece. We optimize paper stock and format to stay under the limit without sacrificing impact.

EDDM indicia placement

The EDDM Retail indicia must be positioned correctly on the mail piece. We pre-flight every file before printing.

Political disclaimers

Federal and state law require paid-for-by disclosures. We flag missing disclaimers before your piece goes to press.

Post office entry

EDDM Retail requires physical drop-off at the originating post office(s). We coordinate entry for multi-route mailings across multiple facilities.

Quantity bundling

Each bundle must contain exactly 50–100 pieces. We sort, strap, and label every bundle to USPS spec before entry.

Saturation vs. Targeting

When EDDM Saturation Beats Voter-File Targeting

EDDM and voter-file targeting are not competing products — they're tools for different jobs. Knowing which one your race calls for is the difference between an efficient mail program and a wasteful one. Here's how we decide.

EDDM wins when…

Saturation mail is the right call when your target audience is broad enough that the list cost and targeting premium of a voter-file pull exceed the waste of mailing non-voters. The clearest signal is registration density: when 70% or more of the households on a carrier route contain registered voters — common in high-turnout suburban and exurban precincts — the cost gap between EDDM and targeted mail collapses, and EDDM's speed and simplicity win.

Registration density on the route exceeds ~70% of households
The race is GOTV in the final 72 hours and speed beats precision
Open-seat or challenger races where name ID is the entire goal
Municipal, school board, or water district races spanning few routes
Ballot measures where the audience is all households, not voters

Targeting wins when…

Voter-file targeting is the right call when your message is meant for a specific slice of the electorate — soft partisans, persuadable independents, or low-turnout base voters. In those cases, EDDM's broad reach is wasted spend, because most of the households you mail to either can't vote in your race or are outside your persuasion universe. Targeting also wins when registration density is low, because the cost of mailing non-voter households compounds quickly.

Persuasion programs aimed at swing or cross-party voters
Races with low registration density (under 50% of households)
Primary races where only one party's voters can participate
Budgets that can't afford saturation across all routes
Campaigns needing modeled scores for turnout or issue affinity
Postage Math

USPS EDDM Postage vs. Marketing Mail Rates

The headline number — $0.214 per piece for EDDM Retail — is real, but it's only part of the picture. Here's how EDDM postage compares to presort marketing mail, and where the hidden costs live in each option.

EDDM Retail postage is a flat $0.214 per piece, regardless of quantity, with no presort or addressing requirement. That simplicity is its main selling point: there's no CASS certification, no NCOA processing, no inkjet addressing, and no per-name list cost. You pay one flat rate and the piece goes to every delivery point on the route.

Presort marketing mail, by contrast, is addressed to specific voters and qualifies for discounted postage based on how densely the mail can be sorted. A 5-digit presort mailing — where every piece in a bundle shares the same first five ZIP digits — can drop postage to roughly $0.26–$0.30 per piece at the commercial political rate. But that rate comes with list-pull, NCOA, addressing, and presort labor costs that EDDM avoids entirely. The crossover point is usually around 5,000–10,000 pieces in a dense district: below that, EDDM is almost always cheaper; above it, presort's per-piece savings overtake EDDM's flat rate once you add in the avoided list and processing costs.

Postage & Cost Breakdown

EDDM Retail postage
$0.214 / piece
Flat rate, no address
Presort marketing mail (5-digit)
$0.26–0.30 / piece
Addressed, discounted
Presort (AADC)
$0.30–0.35 / piece
Lower density, higher rate
EDDM list cost
$0
No voter file needed
Targeted list cost
$0.04–0.12 / name
Voter file pull + NCOA
EDDM addressing
$0
No inkjet addressing
Crossover point
~5,000–10,000 pcs
Dense districts favor presort above this

Rates are illustrative for planning. We provide exact postage in your quote based on routes and quantity.

Route Strategy

Route-Selection Strategy by Precinct

USPS charges the same EDDM rate for every carrier route, but not every route is worth the same to your campaign. We score routes against precinct-level turnout data so your saturation budget goes to the routes that actually decide your race.

Overlay precinct boundaries

We map your district and precinct boundaries against USPS carrier routes, flagging routes that fall fully inside, partially inside, or entirely outside your target area.

Score registration density

For each route, we calculate the percentage of delivery points that contain registered voters. A 400-point route at 72% density beats a 600-point route at 30% density every time.

Rank by turnout history

We layer in precinct-level turnout from the last two comparable elections, prioritizing routes in precincts that historically decide close races.

Budget the routes

You select which scored routes to include based on your budget. The 200-piece minimum per route applies, so small districts may be one or two routes total.

Sequence for timing

For multi-route mailings, we sequence entry across post offices so all routes land in the same in-home window — critical for GOTV consistency.

Suppress overlaps

We remove routes that overlap with a concurrent targeted mail program, so the same household doesn't receive duplicate pieces from your own campaign.

Bottom line: EDDM is cheapest when you need every household. Targeting is cheaper when you need only some. The decision should be driven by your race, your precincts, and your budget — not by which product a vendor happens to sell.

Pricing

EDDM Political Mail Pricing

All-in pricing: design, print, USPS postage, and entry. No hidden fees.

5,000 pieces
~$0.42–0.55 / piece
Great for hyper-local races — school board, water district, city council.
15,000 pieces
~$0.34–0.44 / piece
Most common EDDM volume for state house and county races.
50,000+ pieces
~$0.27–0.36 / piece
Congressional district or multi-county GOTV saturation.

Prices include $0.214/piece USPS EDDM postage. Fill out the form below for an exact quote based on your routes.

Get Started Today

Request Your Free Campaign Quote

No commitment. Response within 1 business day.

What You Get

Free 30-min strategy session
Custom voter targeting recommendation
Detailed pricing within 24 hours
No pressure, no sales pitch
USPS-certified, on-time guaranteed

Request a Free Consultation

Avg. response time under 4 business hours.

Help us prioritize your quote (optional)

🔒 No spam, ever. Your information stays private.